Entries by joinindustrial

Single-Spindle vs. Multi-Spindle Screwdriving Machines

2026-10-24 in /by

This is an assembly line for screw-fastening machines. Manufacturers choosing an automatic screwdriving machine often face a practical question: should they tighten screws one at a time or several at once? A single-spindle machine offers flexibility, while a multi-spindle machine can shorten fastening time when several screws can be tightened in the same operation. However, […]

When Should Manufacturers Automate Screw Fastening?

2026-10-21 in /by

A worker is manually tightening a screw. Manual screw fastening is a small operation with a potentially large impact on manufacturing performance. When an assembly requires many screws, even a few extra seconds per product can limit daily output. Repeated manual tightening can also increase labor costs, create quality variations, and make production harder to […]

Buying Custom Automation Equipment: FAT and Incoterms® 2020 Explained

2026-10-15 in /by

Buying Custom Automation Equipment: FAT, EXW, FCA, FOB and CIF Explained Containers on an ocean-going cargo ship Buying custom automation equipment from overseas involves more than choosing a machine and comparing quotations. You need to know whether the machine can perform the required production tasks, how its performance will be checked, and what happens after […]

How Much Does Custom Automation Equipment Cost?

2026-10-12 in /by

How Much Does Custom Automation Equipment Cost? 7 Key Factors That Affect the Price Introduction Custom automation equipment helps manufacturers work faster, improve product quality, and reduce manual work. But before buying a machine, most manufacturers have one important question: How much will it cost? The answer depends on what the machine needs to do. […]

How Long Does It Take to Build Custom Automation Equipment?

2026-10-09 in /by

How Long Does It Take to Build Custom Automation Equipment? What Actually Determines the Project Timeline? The First Question Is Usually: “How Long Will It Take?” When a factory starts looking for custom automation equipment, one of the first questions is often: “How long will it take to build?” Sometimes the project is already well […]

Hydraulic Oil Filter Selection Guide | Micron & Beta Ratio

2026-10-06 in /by

Hydraulic Oil Filter Selection Guide Choosing the right hydraulic oil filter is not simply a matter of selecting a 5-micron, 10-micron, or 25-micron filter. The correct choice depends on the cleanliness level required by the hydraulic system, filter efficiency, flow rate, pressure drop, oil viscosity, installation location, and the components being protected. A reliable hydraulic […]

Automatic Pallet Dispenser Custom

2026-09-03 in /by

If you are looking for an automatic pallet dispenser custom solution, you probably already know the basic problem: your production line needs pallets continuously, but manually placing pallets is slow, inconsistent, and difficult to scale. The harder question is not “What is a pallet dispenser?” The real question is: How do I find the right […]

How to Choose an Assembly Line?

2026-07-29 in /by

Table of contents: Part 1: How Did the Assembly Line Improve Industry? Part 2: How to Choose the Assembly Line? Final Conclusion: Choose the Right Assembly Line to Build a Smarter and More Efficient Factory Part 1: How Did the Assembly Line Improve Industry? Table of Part 1 contents: The Evolution of Assembly Lines: From […]

Automation Testing vs Manual Testing

2026-07-24 in /by

Table of contents Part 1: Automation Testing vs Manual Testing in Industrial Manufacturing Part 2: How to Choose Automation Testing or Manual Testing in Industrial Manufacturing Conclusion: Choosing the Right Testing Strategy for Manufacturing Success Part 1: Automation Testing vs Manual Testing in Industrial Manufacturing Table of Part 1 contents What Is Automation Testing and […]

ASRS vs Automated Warehouse

2026-07-21 in /by

Table of contents Part 1: ASRS vs Automated Warehouse Part 2: How to Choose ASRS or Automated Warehouse? Conclusion: Choose the Right Warehouse Automation Solution for Long-Term Success Part 1: ASRS vs Automated Warehouse As labor shortages, rising warehouse costs, and increasing order volumes continue to reshape global manufacturing and logistics, more companies are investing […]